白小姐精选四不像大全

CN ||||| EN
username:
password:

Industrial pump series


DG boiler feed pump
Scope of application Overview

Flow: 28 ~ 1020m3 / h
Head: 276 ~ 2520m
Shaft power: 75 ~ 5923kw
Caliber: 78 ~ 300mm
Speed: 2950 ~ 5400r / min

DG type multi-stage centrifugal pump, the pump is a double-cylinder and single-shell horizontal segment type. It is mainly used to transport medium pressure, sub high pressure, high pressure boiler feed water in industrial power stations and high pressure water in industrial equipment.


SHD vertical diagonal flow pump

Scope of application Overview
Flow: 0.61 ~ 16.7m3 / s
Head: 5.7 ~ 42m
Caliber: 1600mm
SHD vertical diagonal flow pump. For transporting clean water, rainwater, seawater and sewage at temperatures below 55 ° C. It is suitable for power plants to be used as circulating pumps, as well as for industrial water use in steel plants, shipyards, urban water supply, drainage works and farmland drainage and irrigation.


NL type condensate pump
Scope of application Overview

Flow: 120 ~ 900m3 / h
Head: 118 ~ 200m
Shaft power: 80 ~ 900kw
Caliber: 40 ~ 350mm
Speed: 1475 ~ 2950r / min

NL-type condensate pump is mainly used for conveying condensate in thermal power plants. It can also be used in places where the medium and condensate are similar. The maximum temperature of the conveying liquid is not more than 80 ° C.


NW type drain pump
Scope of application Overview

Application range: 36 ~ 134m3 / h
Head: 130 ~ 230m
Motor power: 30 ~ 160kw
Caliber: 80 ~ 150m
Speed: 2950r / min


NW type low-adding drain pump is used by water-supply power plants for conveying water from low-pressure heaters. The medium is saturated water> 80 ° C and the maximum temperature is 130 ° C. This series of pumps have good cavitation performance.


R-type hot water circulation pump
Scope of application Overview
Flow: 7.2 ~ 1350m3 / h
Head: 20 ~ 80m
Motor power: 1.5 ~ 360kw
Caliber: 40 ~ 350m
Speed: 1480 ~ 2960r / min
R-type hot water circulation pump is used in metallurgy, power stations, textiles, rubber, plastics and papermaking industries, and transports high-temperature water below 180 ° C without particles.


IS, IR single-stage centrifugal pump

Scope of application Overview
Flow: 6.3 ~ 400m3 / h
Head: 5 ~ 125m
Motor power: 0.55 ~ 110kw
Caliber: 50 ~ 200mm
Speed: 1450 ~ 2900r / min
IS type pump is a single-stage single-suction (axial suction) centrifugal pump, which is used to transport clear water or other liquids with similar physical and chemical properties to clear water, and the medium temperature is not higher than 80 ° C. Suitable for industrial and urban water supply and drainage.
IR-type hot water pump is a derivative of IS-type pump. Its performance, installation size and use medium are the same as IS, but the medium temperature can reach 150 ℃. Suitable for industrial and civil buildings, such as metallurgy, power stations, textiles, chemicals, printing and dyeing, rubber, heating, air conditioning and waste heat utilization.


HPK hot water circulation pump

Scope of application Overview
Flow: 14 ~ 1580m3 / h
Head: 5.2 ~ 218m
Shaft power: 2.2 ~ 450kw
Caliber: 32 ~ 300mm
Speed: 1450 ~ 2900r / min
HPK hot water circulation pump is suitable for hot water circulation in pipelines or closed circuits in metallurgy, power stations, textiles, chemicals, heating and waste heat utilization systems. Transport high temperature water below 2 ~ 400 ℃ without particles.


ZX, ZW series self-priming centrifugal pump

Scope of application Overview
Flow: 3.75 ~ 460m3 / h
Head: 5.5 ~ 117m
Motor power: 0.75 ~ 132kw
Caliber: 50 ~ 200mm
Speed: 1450 ~ 2900r / min
ZX, ZW single-stage self-priming centrifugal pump, high efficiency, short self-priming time, no need to use bottom valve, direct start, start drainage, self-priming height can reach about 6 meters, with "one-time drainage, lifetime self-priming", etc. A variety of functions.
Copyright of Shanghai Water Pump Group Co., Ltd. 2000-2015 is strictly prohibited.